Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Picayune, MS

Exterior Mold & Mildew Removal in Picayune, MS

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth. Typical cost $250-$700.

From the free quote to the final rinse, exterior mold & mildew removal in Picayune, MS follows a simple process: inspect, protect, clean, rinse and check.

How we clean it

Soft washCleaning method

When to book exterior mold & mildew removal

  • Black, green or gray spots and film
  • Slippery walkways and decks
  • Musty smell near shaded walls
  • Growth that returns soon after rinsing

Why it gets dirty

  • Shade, humidity and poor air flow
  • Organic debris and pollen
  • Surfaces that stay damp after rain or sprinklers

Easy upkeep between cleanings

  • Improve sun and air flow by trimming plants
  • Keep gutters and sprinklers from soaking walls
  • Clean small areas with an outdoor mildew cleaner, following the label

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Blasting growth off without killing it, so it grows back fast
  • Mixing cleaning chemicals, which can release toxic gas
  • Damaging plants with runoff

Our process for exterior mold & mildew removal

  1. Identify surfaces and growth
  2. Protect plants and fixtures
  3. Apply a solution that kills the growth
  4. Rinse at low pressure
  5. Post-treat where helpful to slow regrowth

This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.

How much does exterior mold & mildew removal cost?

$250-$700Typical range for typical exterior growth on a home
2-4 hoursTypical time on site
Every 1-2 years in humid or shaded areasRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Exterior Mold & Mildew Removal in Picayune, MS

Mildew and algae are the main reason Mississippi homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Parts of Mississippi are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Spring pollen season in Mississippi coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Besides Picayune (ZIP code 39466), we handle exterior mold & mildew removal in Nicholson (3.5 mi), Carriere (6.5 mi), Pearl River, LA (11.2 mi) and Kiln (16.6 mi). Call (555) 010-0000 for a free quote in Picayune.

Exterior Mold & Mildew Removal: frequently asked questions

How much does exterior mold & mildew removal cost in Picayune, MS?

Exterior Mold & Mildew Removal typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for exterior mold & mildew removal?

Exterior Mold & Mildew Removal is done with soft wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is exterior mold & mildew removal safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule exterior mold & mildew removal?

Every 1-2 years in humid or shaded areas. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Picayune, MS

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Paver Cleaning & Sealing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $600-$1,800

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Soft Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$800

Pool Deck Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$500

Graffiti Removal

Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface.

Typical $200-$800

Pressure Washing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$600

House Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$700

Commercial Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $400-$2,000

Soft Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$800

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Picayune, MS. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote